Accueil Brands N37—Seeed Wio Tracker L1 - Carte de développement GPS LoRa Meshtastic avec écran OLED 1,3″
Benewake TF02-Pro Télémètre LiDAR - Capteur LED 40 m, IP65 Retour à Brands Meshnology N39 - WiFi LoRa 32 V4 Heltec Meshtastic Hardware Device Kit

Barre latérale

N37—Seeed Wio Tracker L1 - Carte de développement GPS LoRa Meshtastic avec écran OLED 1,3″

Prix soldé $12.99 USD

1. Plug-and-Play Meshtastic System – Pre-installed firmware, ready for instant mesh networking.

2. Triple Power System – USB-C, solar input, and 3.7V Li-ion battery support.

3. Long-Range LoRa Communication – Wio-SX1262 (862–930 MHz) low-power mesh network.

4. High-Precision GNSS – GPS / BeiDou / GLONASS / QZSS positioning system.

5. 1.3-inch OLED Display – Real-time status and message display.

6. Expandable Design – Grove / PTH / SWD / UART-I2C-GPIO interfaces.

7. Certified Hardware – FCC / CE / RoHS compliant.

Color: Twilight Purple
Size: Only Case
N37—Seeed Wio Tracker L1 - Carte de développement GPS LoRa Meshtastic avec écran OLED 1,3″

N37—Seeed Wio Tracker L1 - Carte de développement GPS LoRa Meshtastic avec écran OLED 1,3″

Seeed Wio Tracker L1 – LoRa Meshtastic GPS Development Board (1.3" OLED Version)

Remarque : La série Wio Tracker L1 est disponible en quatre versions — choisissez celle qui correspond le mieux à vos besoins. Ce modèle est équipé d’un écran OLED de 1,3 pouce.

N37—Seeed Wio Tracker L1 - LoRa Meshtastic GPS Dev Board with 1.3″ OLED

Caractéristiques

  • Pre-Flashed with Meshtastic Firmware
    Fully pre-installed with Meshtastic firmware, allowing you to power on and get started immediately. Ideal for building peer-to-peer mesh networks without any complicated setup.
  • Triple alimentation
    Prend en charge la charge rapide USB Type-C, l’alimentation solaire et la batterie Li-ion. Parfait pour les déploiements extérieurs, hors réseau et mobiles nécessitant une grande flexibilité.
  • Écran OLED haute visibilité 1,3"
    Comprend un écran OLED net de 1,3 pouce 128×64 pixels pour un affichage clair en temps réel de l’état, des messages et des diagnostics avec une faible consommation d’énergie.
  • Robust LoRa Connectivity
    Based on the Wio-SX1262 module, supporting 862–930 MHz frequencies for long-range, low-power wireless communication.
  • Integrated High-Precision GNSS
    Equipped with the L76K module supporting GPS, BeiDou, GLONASS, and QZSS systems, ensuring reliable global positioning and tracking.
  • Advanced Expandability
    Features Grove connectors for plug-and-play expansion, PTH headers, and SWD debugging pads for advanced development and prototyping. Compatible with the entire Grove ecosystem.
  • Certified and Ready for Deployment
    Designed to meet FCC, CE, and RoHS standards for global deployment.

Caractéristiques techniques

  • Processor: Nordic nRF52840, ARM® Cortex®-M4 with FPU, up to 64 MHz
  • Memory: 1 MB Flash, 256 KB RAM
  • Sans fil :
    • LoRa: Wio-SX1262 module, 862–930 MHz
    • Bluetooth 5.0
  • GNSS: L76K (supports GPS, BeiDou, GLONASS, QZSS)
  • Display: 1.3-inch OLED
    • Resolution: 128 × 64 pixels
    • Active Area: 34.5 × 23.0 × 1.47 mm
  • Interfaces :
    • Connecteur d’affichage E-Ink 24 broches (pour les mises à niveau optionnelles d’écran E-Ink)
    • Grove Connector: UART/I2C/GPIO
    • Connecteurs PTH : UART/I2C/GPIO/Analogique
    • SWD soldering pads for debugging
  • Alimentation :
    • Type-C : 5V / 1A
    • Solar input: 5V / 1A
    • Li-ion battery input: 3.7V / 1A
  • Certification: FCC, CE, RoHS

Hardware Overview

  • Entièrement compatible avec les capteurs et modules Grove
  • Integrated antenna connectors for LoRa and GPS
  • Plateforme de développement conviviale pour Meshtastic, le suivi IoT et la détection environnementale
N37—Seeed Wio Tracker L1 - LoRa Meshtastic GPS Dev Board with 1.3″ OLED
N37—Seeed Wio Tracker L1 - LoRa Meshtastic GPS Dev Board with 1.3″ OLED
N37—Seeed Wio Tracker L1 - LoRa Meshtastic GPS Dev Board with 1.3″ OLED
N37—Seeed Wio Tracker L1 - LoRa Meshtastic GPS Dev Board with 1.3″ OLED
N37—Seeed Wio Tracker L1 - LoRa Meshtastic GPS Dev Board with 1.3″ OLED
N37—Seeed Wio Tracker L1 - LoRa Meshtastic GPS Dev Board with 1.3″ OLED

Contenu de la boîte

  • 1 × carte Wio Tracker L1 avec écran OLED 1,3 pouces
  • 1 × Antenne LoRa
  • 1 × Câble RF 60mm (RP-SMA Femelle vers IPEX)
  • 1 × GPS Antenna
  • 1 × 3000 mAH Battery
  • 1 × Boîtier 3D N37

Typical Applications

  • Outdoor mesh network nodes
  • Suivi d’actifs et d’animaux équipé GPS
  • Off-grid communication systems
  • Prototypage IoT DIY et éducation

Commencez dès aujourd’hui votre projet Meshtastic avec le Wio Tracker L1 – la carte GPS LoRa polyvalente, compatible open source, dotée d’un écran et d’une grande extensibilité.

Take a Closer Look

N37—Seeed Wio Tracker L1 - Carte de développement GPS LoRa Meshtastic avec écran OLED 1,3″ 1

Specification

Item Specification
Processor
Nordic nRF52840 (ARM Cortex-M4, up to 64 MHz)
Memory
1MB Flash / 256KB RAM
LoRa
Wio-SX1262 (862–930 MHz)
Bluetooth
5.0
GNSS
L76K (GPS / BeiDou / GLONASS / QZSS)
Display
1.3-inch OLED 128×64
Interfaces
Grove / PTH / SWD / UART-I2C-GPIO
Power
USB-C / Solar / Li-ion battery (3.7V)
Certification
FCC/ CE/ RoHS

Warranty & After-Sales

Many of our products are handcrafted, which may result in minor variations or imperfections. If you experience any quality-related issues withinone year of purchase, we will offer afull refund or a replacement shipment. Please contact our support team with photos or videos of the issue, and we will assist you accordingly.

Technical Support & Resources

N37—Seeed Wio Tracker L1 - Carte de développement GPS LoRa Meshtastic avec écran OLED 1,3″ 1
Product Manual Download
N37—Seeed Wio Tracker L1 - Carte de développement GPS LoRa Meshtastic avec écran OLED 1,3″ 2
Certification
N37—Seeed Wio Tracker L1 - Carte de développement GPS LoRa Meshtastic avec écran OLED 1,3″ 3
Join The Community

FAQ

We currently support the following payment methods:

PayPal: Secure and convenient online payment option.
Credit Card Payments: We accept VISA, Mastercard, AMEX, Discover, JCB, and other major credit cards.
Bank Transfer: If you require wholesale purchases or wish to place a purchase order, please contact us. We will provide you with our bank account details and an invoice for your transaction.

Please enter the corresponding discount code in the designated field at the top right of the checkout page and click "Apply." Please note that different discount codes may have varying applicable products, usage limitations, and expiration dates.
For purchase orders, we offer exclusive discounts. Please contact our customer support team at sales@meshnology.com to receive a custom quote.

We use different shipping methods depending on the destination country.
United States: We use Amazon Logistics, YanWen, and other shipping providers. Delivery times typically range from 3-14 business days.
Other Countries: Shipping methods vary depending on local availability, with most shipments arriving within 7-14 business days.
Please note that shipping times may vary based on the remoteness of the shipping address.

Expedited shipping is a premium service we offer for faster package delivery.
We work with DHL, UPS, FedEx, and other reliable carriers to ship your order.
For most countries, expedited shipping delivery time is approximately 5-7 business days.

Please contact our support team and provide pictures or videos of the product. We will then provide you with the return warehouse address. Once we receive and verify the returned product, we will process your refund or exchange accordingly.

Once we receive the returned product, we will process your refund within 3 business days.
However, your bank may take 1-3 business days to complete the transaction, meaning the refund may not appear in your account immediately and could take a few business days to reflect.

Recommeded For You