Seeed Wio Tracker L1 Lite - Carte de développement GPS LoRa Meshtastic polyvalente
1. Pre-installed firmware makes it ready for immediate deployment in your mesh network projects without additional setup hassles.
2. Supports Type-C fast charging, solar input, and 3.7V Li-ion battery power—perfect for portable and off-grid scenarios.
3. Optional 1.3-inch OLED and 2.13-inch E-Ink screens for customizable power consumption and visual feedback requirements.
4. Fully Grove-compatible,with PTH headers and SWD pads for advanced hardware customization and debugging.
In The Box: 1× Wio Tracker L1 Board, 1× LoRa Antenna, 1× GPS Antenna, 1× 60mm RF Cable (RP-SMA Female to IPEX)
Guaranteed Safe Checkout
Seeed Wio Tracker L1 Lite - Carte de développement GPS LoRa Meshtastic polyvalente
Seeed Wio Tracker L1 Lite – Carte de développement GPS LoRa Meshtastic polyvalente
The Wio Tracker L1 is a powerful, highly adaptable development board designed for LoRa-based Meshtastic networks, outdoor tracking, and IoT projects. It comes pre-flashed with Meshtastic firmware, ensuring seamless, ready-to-use setup right out of the box.
Caractéristiques principales
-
Pre-flashed with Meshtastic
Pre-installed firmware makes it ready for immediate deployment in your mesh network projects without additional setup hassles. -
Triple alimentation
Prend en charge la charge rapide Type-C, l’entrée solaire et l’alimentation par batterie Li-ion 3,7 V—parfait pour les usages portables ou hors réseau. -
Flexible Display Support
Optional 1.3-inch OLED and 2.13-inch E-Ink screens for customizable power consumption and visual feedback requirements. -
High Expandability
Fully Grove-compatible, with PTH headers and SWD pads for advanced hardware customization and debugging.
Caractéristiques techniques
- Processor: Nordic nRF52840 ARM® Cortex®-M4 with FPU, up to 64 MHz
- Mémoire intégrée : 1 Mo Flash, 256 kB RAM
- Sans fil : LoRa (Wio-SX1262), 862–930 MHz ; Bluetooth 5.0
- GPS Module: L76K (GPS, BeiDou, GLONASS, QZSS)
-
Interfaces d’affichage :
- 1.3-inch OLED (optional)
- 2.13-inch E-Ink (optional)
-
Interfaces :
- Connecteur Grove (UART/IIC/GPIO)
- Plated Through Hole (PTH) headers for UART/IIC/GPIO/Analog
- Pastilles de soudure SWD réservées
-
Alimentation :
- Type-C : 5V, 1A
- Interface solaire : 5V, 1A
- Interface batterie : 3,7V, 1A
- Certification: FCC, CE, RoHS
Le colis contient
- 1× Wio Tracker L1 Board
- 1× LoRa Antenna
- 1× antenne GPS
- 1× 60mm RF Cable (RP-SMA Female to IPEX)
Take a Closer Look
Specification
| Item | Specification |
|---|---|
| Processor | Nordic nRF52840 ARM® Cortex®-M4 with FPU, up to 64 MHz |
| On-Chip Memory | 1 MB Flash, 256 kB RAM |
| Wireless | LoRa (Wio-SX1262), 862–930 MHz; Bluetooth 5.0 |
| GPS Module | L76K (GPS, BeiDou, GLONASS, QZSS) |
| Display Interfaces | 1.3-inch OLED (optional), 2.13-inch E-Ink (optional) |
| Interfaces | Grove Connector (UART/IIC/GPIO); Plated Through Hole (PTH) headers for UART/IIC/GPIO/Analog; Reserved SWD soldering pads |
| Power | Type-C: 5V, 1A Solar interface: 5V, 1A Battery interface: 3.7V, 1A |
| Certification | FCC, CE, RoHS |