Meshnology N37 Wio Tracker L1 Meshtastic GPS Long Range LoRa Device
1. Plug-and-Play Meshtastic System – Pre-installed firmware, ready for instant mesh networking.
2. Triple Power System – USB-C, solar input, and 3.7V Li-ion battery support.
3. Long-Range LoRa Communication – Wio-SX1262 (862–930 MHz) low-power mesh network.
4. High-Precision GNSS – GPS / BeiDou / GLONASS / QZSS positioning system.
5. 1.3-inch OLED Display – Real-time status and message display.
6. Expandable Design – Grove / PTH / SWD / UART-I2C-GPIO interfaces.
7. Certified Hardware – FCC / CE / RoHS compliant.
In The Box: 1 × Wio Tracker L1 Board (1.3-inch OLED Display, 1 × LoRa Antenna, 1 × GPS Antenna, 1 × RF Cable (RP-SMA to IPEX) 1 × 3.7V Rechargeable Battery, 1 × 3D Printed Protective Case (N37 Enclosure)
Meshnology N37 Wio Tracker L1 Meshtastic GPS Long Range LoRa Device
Seeed Wio Tracker L1 – LoRa Meshtastic GPS Development Board (1.3" OLED Version)
Note: The Wio Tracker L1 Series is available in four versions—choose the one that best fits your needs. This model comes with a 1.3-inch OLED screen.
Merkmale
-
Pre-Flashed with Meshtastic Firmware
Fully pre-installed with Meshtastic firmware, allowing you to power on and get started immediately. Ideal for building peer-to-peer mesh networks without any complicated setup. -
Triple Power Supply Options
Supports USB Type-C fast charging, solar input, and Li-ion battery power. Perfect for outdoor, off-grid, and mobile deployments where flexibility is essential. -
High-Visibility 1.3" OLED Display
Includes a crisp 1.3-inch 128×64 pixel OLED display for clear real-time status, messages, and diagnostics with low power draw. -
Robust LoRa Connectivity
Based on the Wio-SX1262 module, supporting 862–930 MHz frequencies for long-range, low-power wireless communication. -
Integrated High-Precision GNSS
Equipped with the L76K module supporting GPS, BeiDou, GLONASS, and QZSS systems, ensuring reliable global positioning and tracking. -
Advanced Expandability
Features Grove connectors for plug-and-play expansion, PTH headers, and SWD debugging pads for advanced development and prototyping. Compatible with the entire Grove ecosystem. -
Certified and Ready for Deployment
Designed to meet FCC, CE, and RoHS standards for global deployment.
Specifications
- Processor: Nordic nRF52840, ARM® Cortex®-M4 with FPU, up to 64 MHz
- Memory: 1 MB Flash, 256 KB RAM
-
Wireless:
- LoRa: Wio-SX1262 module, 862–930 MHz
- Bluetooth 5.0
- GNSS: L76K (supports GPS, BeiDou, GLONASS, QZSS)
-
Display: 1.3-inch OLED
- Resolution: 128 × 64 pixels
- Active Area: 34.5 × 23.0 × 1.47 mm
-
Interfaces:
- 24P E-Ink Display Connector (for optional E-Ink screen upgrades)
- Grove Connector: UART/I2C/GPIO
- PTH headers: UART/I2C/GPIO/Analog
- SWD soldering pads for debugging
-
Power:
- Type-C: 5V / 1A
- Solar input: 5V / 1A
- Li-ion battery input: 3.7V / 1A
- Certification: FCC, CE, RoHS
Hardware Overview
- Fully compatible with Grove sensors and modules
- Integrated antenna connectors for LoRa and GPS
- User-friendly development platform for Meshtastic, IoT tracking, and environmental sensing
What's in the Box
- 1 × Wio Tracker L1 Board with 1.3-inch OLED Display
- 1 × LoRa Antenna
- 1 × 60mm RF Cable (RP-SMA Female to IPEX)
- 1 × GPS Antenna
- 1 × 3000 mAH Battery
- 1 × N37 3D Case
Typical Applications
- Outdoor mesh network nodes
- GPS-enabled asset and wildlife tracking
- Off-grid communication systems
- DIY IoT prototyping and education
Get started with your Meshtastic project today with the Wio Tracker L1 – the versatile, open-source-friendly LoRa GPS board with display and exceptional expandability.
Take a Closer Look
Specification
| Item | Specification |
|---|---|
| Processor | Nordic nRF52840 (ARM Cortex-M4, up to 64 MHz) |
| Memory | 1MB Flash / 256KB RAM |
| LoRa | Wio-SX1262 (862–930 MHz) |
| Bluetooth | 5.0 |
| GNSS | L76K (GPS / BeiDou / GLONASS / QZSS) |
| Display | 1.3-inch OLED 128×64 |
| Interfaces | Grove / PTH / SWD / UART-I2C-GPIO |
| Power | USB-C / Solar / Li-ion battery (3.7V) |
| Certification | FCC/ CE/ RoHS |
