Meshnology N30 ESP32 LoRa V3 Pre-built Meshtastic Text Radio for Long Range LoRa
1. Dual-Core ESP32-S3 Processor – Up to 240MHz performance for IoT and mesh networking applications.
2. Long-Range LoRa Communication – SX1262 module for stable, kilometer-level connectivity.
3. WiFi + Bluetooth + LoRa Integration – Multi-protocol wireless communication in one device.
4. Portable Battery System – 1100mAh Li-ion battery with smart power management.
5. OLED Display – 0.96" 128×64 screen for real-time status and debugging.
6. Developer Friendly – Supports Arduino, PlatformIO, and Meshtastic firmware.
7. Optimized RF Design – Stable antenna system with IPEX LoRa interface support.
In The Box: 1 × ESP32 LoRa V3 Development Board, 1 × 1100mAh Li-ion Battery (with protection board), 1 × Protective Case (N30 enclosure), 1 × 863–928MHz LoRa Antenna
Guaranteed Safe Checkout
Meshnology N30 ESP32 LoRa V3 Pre-built Meshtastic Text Radio for Long Range LoRa
Meshnology N30 ESP32 Meshtastic Text Radio
Overview
- The Meshnology N30 is a Meshtastic text radio based on the Heltec ESP32 LoRa V3 platform, designed for long-range off-grid communication and IoT applications.
- This pre-built meshtastic device integrates a dual-core ESP32-S3 processor, SX1262 LoRa module, WiFi, and Bluetooth into a compact development-ready device.
- Built for makers, engineers, and field deployments, the N30 provides stable mesh networking, low-power operation, and easy integration with the Meshtastic ecosystem.
- A reliable long-range text radio platform designed for Meshtastic and decentralized communication networks.
Kindly Note
This N30 device is based on the Heltec ESP32 LoRa V3 architecture and is fully compatible with the Meshtastic ecosystem. It is optimized for portable off-grid communication and IoT development.
Docs & Resources
Take a Closer Look
Specification
| Item | Specification |
|---|---|
| Processor | ESP32-S3FN8 dual-core 240MHz |
| LoRa Chip | SX1262 |
| Wireless | WiFi 802.11 b/g/n + Bluetooth 5 BLE + LoRa |
| Memory | 384KB ROM + 512KB SRAM + 8MB Flash |
| Battery | 1100mAh Li-ion with protection circuit |
| Power Management | Auto switch between USB and battery |
| Interface | USB Type-C + SH1.25 battery connector + IPEX antenna |
| Display | 0.96" OLED 128×64 |
It was not prebuilt. You get the individual pieces, not a premade unit.
Im making a new lora 868-915 mhz message system and this is perfect for my needs. much better than the green heltec cases where you cant install a battery or external antenna. great for if you need to use other antennas i,e roof antenna etc. just one thing. can youj make me a lot of screens with meshmingle on... ill take a few hundred.
Thank you for your message, we noticed the problem you mentioned, now our sales director will contact you by email to confirm some details, please pay attention to check, wish you have a good day .
Units function.
Great little product and learn to put it together and flash it
Tried different cables have a different mesh and no issues
Works great! I was able to connect my phone and send and receive messages over LoRa. You need a battery bank to keep it running. Running on the included battery, it will run for 4 to 5 hours.