Meshtastic Devices

1. Plug-and-Play Meshtastic System – Pre-installed firmware, ready for instant mesh networking.

2. Triple Power System – USB-C, solar input, and 3.7V Li-ion battery support.

3. Long-Range LoRa Communication – Wio-SX1262 (862–930 MHz) low-power mesh network.

4. High-Precision GNSS – GPS / BeiDou / GLONASS / QZSS positioning system.

5. 1.3-inch OLED Display – Real-time status and message display.

6. Expandable Design – Grove / PTH / SWD / UART-I2C-GPIO interfaces.

7. Certified Hardware – FCC / CE / RoHS compliant.

1. ESP32-S3 + SX1262 Chipset – Supports Wi-Fi, Bluetooth BLE, and LoRa communication in one platform.
2. High Memory Upgrade – 2MB PSRAM + 16MB Flash for improved performance and UI rendering.
3. High-Power LoRa Transmission – Up to 27±1 dBm for extended communication range.
4. Integrated Design – Built-in casing, OLED display protection, and improved antenna stability.
5. Solar Power Support – SH1.25-2P solar input (4.4–6V / ≤540mA).
6. Advanced Power Management – Smart charging, protection circuits, and auto power switching.
7. GNSS Expansion Ready – SH1.25-8Pin interface for GPS module expansion.

1. ESP32-S3 Dual-Core Processor – Up to 240MHz performance for IoT and mesh networking

2. SX1262 LoRa Module – Long-range, low-power wireless communication

3. WiFi + Bluetooth + LoRa Integration – Multi-protocol connectivity in one device

4. High-Capacity Battery Support – 3000mAh Li-ion for extended field use

5. 0.96" OLED Display – Real-time system status and debugging

6. USB Type-C Interface – Fast programming and stable power input

1. Dual-Core ESP32-S3 Processor – Up to 240MHz performance for IoT and mesh networking applications.

2. Long-Range LoRa Communication – SX1262 module for stable, kilometer-level connectivity.

3. WiFi + Bluetooth + LoRa Integration – Multi-protocol wireless communication in one device.

4. Portable Battery System – 1100mAh Li-ion battery with smart power management.

5. OLED Display – 0.96" 128×64 screen for real-time status and debugging.

6. Developer Friendly – Supports Arduino, PlatformIO, and Meshtastic firmware.

7. Optimized RF Design – Stable antenna system with IPEX LoRa interface support.

1. All-in-One Design – Includes enclosure, expansion board, LoRa antenna, and optional modules

2. ESP32-S3 Platform – High-performance MCU for IoT and mesh networking

3. SX1262 LoRa Technology – Stable long-range communication

4. Rugged Build – Aluminum alloy frame + tempered glass + PC back cover

5. GNSS Support – Compatible with Quectel L76K positioning module

1. Qi2 Magnetic Wireless Charging – Fast and stable magnetic alignment for effortless phone charging.

2. Dual Smart Communication – Integrated Bluetooth + LoRa for long-range, low-power connectivity.

3. E-Ink Smart Display – Ultra-low power screen for status, messages, and system information.

4. Meshtastic Ready – Fully compatible with open-source mesh networking systems.

5. Simultaneous Charge & Discharge – Charge devices while recharging the power bank.

6. Multi-Protocol Fast Charging – Supports PD / AFC / Huawei fast charging standards.

1. Complete IoT Kit – ESP32 + LoRa + battery + enclosure included

2. SX1262 LoRa Module – Stable long-distance wireless communication

3. Multi-Protocol Support – WiFi, Bluetooth 5, and LoRa integration

4. 3000mAh Battery – Long-lasting field deployment power

5. 0.96" OLED Display – Real-time system status monitoring

6. Dual Antenna System – SMA + IPEX for improved RF performance

7. Rugged Protective Case – Designed for outdoor and mobile use

8. Developer Friendly – Supports Arduino IDE & Meshtastic firmware

1. All-in-One LoRa Development Kit – Pre-assembled ESP32 + LoRa + battery + enclosure solution

2. Long-Range SX1262 Communication – Stable performance with up to 21 dBm TX power and high sensitivity (-134 dBm)

3. Multi-Protocol Connectivity – Wi-Fi, Bluetooth 5 (BLE), and LoRa integrated in one platform

4. Ready for Meshtastic – Fully compatible with decentralized mesh networking applications

5. Rich Hardware Interfaces – GPIO, I2C, SPI, UART, ADC, and touch support for expansion

6. Developer Friendly – Supports Arduino, ESP-IDF, PlatformIO and MicroPython

1. Meshtastic LoRa transceiver designed for outdoor communication, GPS tracking, and IoT mesh networking.
2. Powered by the Nordic nRF52840 chipset and SX1262 LoRa module。

3. Delivers stable long-range connectivity with ultra-low power consumption, making it ideal for off-grid communication and emergency scenarios.

4. Pre-configured firmware that compatible with Meshtastic. Supports GPS / GLONASS / BeiDou / QZSS

5. High perforamnce with 1.54" E-Ink Display, 1200mAh battery and 5.6μA standby consumption.

1. 5W Solar Powered System – Continuous off-grid operation with energy harvesting design

2. Meshtastic Ready – Pre-installed firmware for seamless mesh networking integration

3. Long-Range LoRa Connectivity – Stable transmission up to 8–9 km in open environments

4. Expandable Sensor Support – Grove interface for temperature, humidity, and air quality sensors

5. Self-Sustaining Design – Supports 18650 battery backup for 24/7 operation

6. Mesh Relay Capability – Acts as a repeater node to extend network coverage

7. Rugged Outdoor Build – Designed for long-term deployment in harsh environments

1. All-in-One Meshtastic Node – Pre-built ESP32 + LoRa + battery + enclosure system

2. Long-Range SX1262 LoRa Communication – Stable transmission with high sensitivity (-134 dBm) and up to 21 dBm output

3. Multi-Protocol Wireless – Wi-Fi, Bluetooth 5 (BLE), and LoRa integrated in one platform

4. Plug & Play Deployment – Ready-to-use design, no complex assembly required

5. Rich Expansion Interface – GPIO, UART, I2C, SPI, ADC, and touch support

6. Developer Friendly – Fully compatible with Arduino, ESP-IDF, PlatformIO, and Meshtastic firmware

1. Solar-Powered Off-Grid Operation – 18V solar input for continuous energy harvesting.

2. High-Capacity Battery System – 3 × 2800mAh lithium batteries for extended runtime.

3. Dual Connectivity – LoRa (SX1262) + BLE (nRF52840).

4. SMA External Antenna Support – Enhanced signal range and stability.

5. IP65 Rugged Enclosure – Waterproof aluminum alloy housing.

6. Wide Temperature Range – Stable operation from -20°C to 60°C.

7. Flexible Mounting – Supports pole and wall installation.