Mesh Pocket M1 10000mah Qi2 Heltec Wireless Meshtastic Magnetic Power Bank Charger
1. Qi2 Magnetic Wireless Charging – Fast and stable magnetic alignment for effortless phone charging.
2. Dual Smart Communication – Integrated Bluetooth + LoRa for long-range, low-power connectivity.
3. E-Ink Smart Display – Ultra-low power screen for status, messages, and system information.
4. Meshtastic Ready – Fully compatible with open-source mesh networking systems.
5. Simultaneous Charge & Discharge – Charge devices while recharging the power bank.
6. Multi-Protocol Fast Charging – Supports PD / AFC / Huawei fast charging standards.
In The Box: 1 × Mesh Pocket M1 Magnetic Power Bank, 1 × USB-C Charging Cable, 1 × Magnetic Charging Adapter, 1 × User Manual, 1 × Magnetic Sticker (for phone attachment)
Recommended For You
1. Dual Input Interface – Combines capacitive touchscreen with rotary encoder for flexible human-machine interaction. 2. High-Performance ESP32-S3&n…
Details...
1. Built around the ESP32-S3 dual-core MCU, intergrating LoRa long-range radio, 2.4 GHz Wi-Fi and Bluetooth 5 (LE) for robust AIoT prototyping and deployment. …
Details...
1. ESP32-S3 + SX1262 Chipset – Supports Wi-Fi, Bluetooth BLE, and LoRa communication in one platform.2. High Memory Upgrade – 2MB PSRAM + 16MB Flas…
Details...
1. Dual-Band Compatibility – Supports both 868MHz and 915MHz LoRa frequency bands. 2. Stable RF Performance – Designed for consistent signal transm…
Details...
Mesh Pocket M1 10000mah Qi2 Heltec Wireless Meshtastic Magnetic Power Bank Charger
Meshnology Mesh Pocket M1 Magnetic Power Bank
The Meshnology Mesh Pocket M1 is a next-generation smart magnetic power bank that combines Qi2 wireless charging, LoRa long-range communication, Bluetooth connectivity, and an e-ink display into a single compact device. Designed for off-grid communication, outdoor exploration, and IoT development, Mesh Pocket M1 is fully compatible with open-source ecosystems such as Meshtastic, making it an ideal companion for decentralized mesh networking and emergency scenarios.
Kindly Note
Mesh Pocket M1 is designed as a smart communication power bank, not just a charging device. LoRa and e-ink functions may vary depending on firmware version and configuration.
Take a Closer Look
Specification
| Item | Specification |
|---|---|
| Battery Capacity | 5000mAh / 10000mAh (Li-Polymer) |
| Wireless Charging | Qi2 Magnetic, 5W / 7.5W / 10W / 15W |
| USB-C Output | 5V-3A / 9V-2.22A (PD supported) |
| Connectivity | Bluetooth 5.0 + LoRa (SX1262) |
| Frequency Bands | 863–870 MHz / 902–928 MHz |
| Display | 2.13-inch E-Ink Screen |
| Simutaneous Use | Supports wireless + wired charging at the same time |
| Protection System | Overvoltage, overcurrent, short circuit, temperature control, battery safety protection |
| Dimensions | 102 × 74.1 × 10.8 mm |
| Weight | Approx. 140g |
